|
|
|
Kto jest w sklepie?
Sklep przegląda 6043 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
5-3. INK LOW WARNING RESET BY BUTTON OPERATION Ink low warning This printer detects the remaining ink level by counting the number of ejected ink dots in the same way as the BJC-80/80v. When the setting of the ink low warning is enabled, and the remaining ink gets low, the beeper sounds twice, and the ERROR LED blinks. Pressing the cartridge replacement button will sound the beeper and move the carriage to the center, and the ERROR LED indicates the ink cartridge for which the remaining ink is low as shown below.
Blinks once: when the remaining ink of the BCI-10 / BCI-11Bk / BCI-12Bk is little
Blinks twice: when the remaining ink of the BCI-11Color / BCI-12Color is little
Blinks 3 times: when the remaining ink of the BCI-11 BK & Color / BCI-12 BK & Color is little
The ink low warning reset function by button operation is added to this printer. The button operation procedures are shown below. (The ink low warning of the BJC-80/80v can be reset from the host computer only.) Operation 1) Turn on the printer. 2) Press the cartridge replacement button to move the carriage to the center. If the carriage was moved to the center by signals from the PC, the reset operation by the cartridge replacement button is not possible. 3) Make sure that the proper cartridge is installed in the carriage. If not, install the proper one. (The ink dot counter reset is effective only to the ink cartridge type installed in the carriage.) 4) Press and hold the RESUME button for the number of beeps corresponding to the warned ink type to select the ink type for which the dot counter is to be reset, and release the RESUME button. The number of beeper sounds is as follows: Once: Twice: 3 times: 4 times: The dot counter of the BCI-10/BCI-11Bk/BCI-12Bk is reset. The dot counter of the BCI-11Color/BCI-12 Color is reset. The dot counter of the BCI-11Bk&Color/BCI-12Bk&Color is reset. The selected ink type is canceled.
5) Press the cartridge replacement button. The ink dot counter selected in the procedure 4) and the ink low warning are reset, and at the same time, the carriage returns to the home position.
11
|
|
|
> |
|
