MACKIE C200
Instrukcja Obsługi

HOOKUP DIAGRAMS
Quick Start
Make all initial connections with the power switches OFF on all equipment. Make sure all master volume, level, or gain controls are all the way down. 1. Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplifier. 2. Connect the �Speaker Output� from your power amplifier (or powered mixer) to the INPUT connector on the C200. 3. Turn on your mixing console (or other signal source). 4. Turn on the amplifier. Turn up its volume or gain control(s) as recommended by the manufacturer. 5. Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation.

POWERED MIXER

MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL

C200: WITH A MACKIE POWERED MIXER, AND USING THE THRU JACK
SERIAL NUMBER MANUFACTURING DATE SERIAL NUMBER MANUFACTURING DATE
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA MANUFACTURED IN CHINA � FABRIQUE AU CHINE � COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE � PATENT PENDING DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA MANUFACTURED IN CHINA � FABRIQUE AU CHINE � COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE � PATENT PENDING

INPUT

PARALLEL

THRU

INPUT

PARALLEL

THRU

C300 C200 C200

Stereo Power Amplifier

Left Line level Output Mixer or Preamplifier

Right Line level Output
1202-VLZ PRO

C200: WITH A MIXER AND POWER AMPLIFIER
4