|
|
|
Kto jest w sklepie?
Sklep przegląda 5922 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Timer delay To set the Timer for a 1- to 24-hour delay until the air conditioner turns off (the air conditioner must be On):
1. Press TIMER. Indicator light will flash.
To operate air conditioner with remote control
POWER ON/OFF
Auto Cool
Cool
Turbo
2. Press the plus or minus button to adjust the delay time (1 to 24 hours). 3. Press TIMER again or wait 10 seconds. Indicator light will remain on.
Fan Only FAN SPEED Power Saver
High
Low
To set the Timer to turn on the air conditioner, keeping previous settings:
1. Turn off air conditioner. 2. Press TIMER. Indicator light will flash. 3. Press the plus or minus button to change delay time (1 to 24 hours). 4. Press TIMER again or wait 10 seconds. Indicator light will remain on.
Temp / Time Timer
To set the Timer to turn on the air conditioner, changing the previous settings:
1. 2. 3. 4. Turn air conditioner on. Adjust MODE to Auto, Cool, Fan Only, or Power Saver. Adjust FAN SPEED to Turbo, High or Low. Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
NOTE: Two AA batteries (not included) power the remote control. Replace batteries after 6 months of use, or when the remote control starts to lose power.
To turn the air conditioner on or off:
Press POWER ON/OFF.
POWER ON/OFF
5. Wait 3 seconds before turning off air conditioner. 6. Press TIMER. Indicator light will flash. 7. Press the plus or minus button to change delay time (1 to 24 hours). 8. Press TIMER again or wait 10 seconds. Indicator light will remain on.
To select the mode: To clear Timer delay program:
NOTE: Air conditioner can be either on or off. Press and hold TIMER for 3 seconds. Indicator light will shut off. Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER. s Auto Cool - fan speed is adjusted automatically.
s s
Fan Only - fan speed is automatically set at Turbo. Cool or Power Saver - you can adjust the fan speed.
Auto Cool
To see the remaining time (in hours):
1. Press TIMER once after it has been programmed. 2. While the display is showing the remaining time, you can press the plus or minus button to increase or decrease the time.
Cool
Fan Only
Power Saver
9
|
|
|
> |
|
