JVC CA-MXJ111VUT
Instrukcja Obsługi

o

Press the CD £ /8 button (or the 3 button on the Remote Control). � If there is a CD in the disc tray for the selected disc number, the power is automatically turned on and the CD is played from the first track. � If there is no CD in the disc tray for the selected disc number, the power is automatically turned on and �NO DISC� appears on the display. The CD Player is in stop mode. Press the CD1, CD2 or CD3 button. � If there is a CD in the disc tray for the selected disc number, the power is automatically turned on and playback starts from the selected CD. � If there are no CDs in CD Player, the power is automatically turned on and �NO DISC� appears on the display in Normal Play mode. The CD Player is set to stop mode. Press the 0 button. � The power turns on, and the tray opens automatically.

Inserting Discs
1. Press the 0 button on the left of the Disc button you want to insert the disc into.
The disc tray slides out automatically.

2. Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD, please set the CD in the right place at the center of the tray.

CD Tray

CORRECT

INCORRECT

3. Press the 0 button to close the tray. 4. Repeat step 1 to step 3 to insert other discs into other trays.
� To continue putting discs into other trays, even if a tray is open, by pressing the 0 button of another disc tray, the open tray will close automatically, and the new disc tray will slide out.

o

To put an 8 cm CD into a tray, insert it so that it is aligned with the groove in the tray�s center. If a tray is open when the System switches to Standby mode, the tray is closed automatically. If the CD cannot be read correctly (due to scratches etc.), �00 00000� appears on the display.

14

English

The Quickest Way to Start a CD Is with the One Touch Operation �������������������������