WHIRLPOOL CDB8750TD0
Instrukcja Obsługi

Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away. Initial display time after rotating clock pattern: 3 min. Do not use detergent with this cycle.
PreWash Main Wash Rinse Rinse Final Heated Rinse Dry Time (min) 10 Water Usage (gal/L) 1.8-/6.8

Rinse Only

Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.

To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door. 2. Open the door. If the detergent dispenser cover is still closed, add the item. 3. Close the door firmly until it latches. 4. Press START/RESUME. The dishwasher resumes the cycle after a 5-second pause.

�

*If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat, and water as needed.

Canceling a Cycle
Anytime during a cycle, press CANCEL/DRAIN. Your dishwasher starts a 2-minute drain, if needed, and clears all indicators. Let the dishwasher drain completely. NOTE: If your dishwasher does not need draining, the dishwasher stops and clears all indicators.

Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn off the option, or select a different option if desired. You can change an option anytime before the selected option begins. For example, you can turn off the drying option anytime before drying begins. After a wash cycle, the dishwasher remembers the options used. It uses the same options in the next wash cycle, if you press only START/RESUME.

To stop the drain
You can press CANCEL/DRAIN again to stop the drain immediately. Be sure to drain the dishwasher before starting a new cycle.

Hi Temp Wash
Select this option to increase the target water temperature during the wash portions of the cycle. Hi Temp Wash raises the target water temperature to 145ºF (63ºC) in the main wash. Heating the water helps improve washing results. Hi Temp Wash is useful when loads contain baked-on food. This option adds heat, wash time and water to the cycle. NOTE: Hi Temp Wash is an option with Pots & Pans and Normal cycles.

To clear the indicators
Press CANCEL/DRAIN before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting
During the first fill of a cycle
1. Press a new cycle and/or options. 2. Check the detergent dispensers. They must be filled properly for the new cycle. 3. Press START/RESUME.

Heated Dry
Select this option to dry dishes with heat. Switching off Heated Dry skips the dry period. This is useful when loads contain plastic dinnerware that may be sensitive to high temperatures. The dishes take longer to dry, and some spotting may occur. Some items (such as plastics) may need towel drying. For best drying, use a liquid rinse aid. NOTE: Heated Dry is an option with all cycles, except the Rinse Only cycle. Heated Dry begins automatically with all cycles unless you switch it off.

After the first fill of a cycle
1. Press CANCEL/DRAIN. Your dishwasher starts a 2-minute drain, if needed, and clears all indicators. Let the dishwasher drain completely. NOTE: If your dishwasher does not need draining, the dishwasher stops and clears all indicators. 2. Check the detergent dispensers. They must be filled properly for the new cycle. 3. Press a new cycle and/or options. 4. Press START/RESUME. (The door must be closed.)

10