SHARP CDES99
Instrukcja Serwisowa

CD-ES900/CD-ES99

[2] Removing and reinstalling the main parts
1. TAPE MECHANISM SECTION
Perform steps 1 to 5 and 6 of the disassembly method to remove the tape mechanism.

1.3. How to remove the pinch roller (TAPE 1/2) (See Fig. 3)
1. Carefully bend the pinch roller pawl in the direction of the arrow <A>, and remove the pinch roller (C1) x 1 pc., in the direction of the arrow <B>. NOTE: When installing the pinch roller, pay attention to the spring mounting position.

1.1. How to remove the record/playback and erase heads (TAPE 2) (See Fig. 1)
1. When you remove the screws (A1) x 2 pcs., the recording/playback head and three-dimensional head of the erasing head can be removed.
TAPE 2 Clutch Ass'y

Record/Playback Head
Pinch Roller (C1)x1 Pinch Roller Pawl

Pull

<A> <B>

Figure 3
Erase Head

1.4. How to remove the belt (TAPE 2) (See Fig. 4)
(A1)x2 �2x9mm

1. Remove the main belt (D1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (D2) x 1 pc.

1.5. How to remove the belt (TAPE 1) (See Fig. 4)
Figure 1 1. Remove the main belt (E1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (E2) x 1 pc.
Motor TAPE 1 TAPE 2 Main Belt Main Belt (E1)x1 (D1)x1 Tape

1.2. How to remove the playback head (TAPE 1) (See Fig. 2)
1. When you remove the screws (B1) x 2 pcs., the playback head can be removed.
TAPE 1 Clutch Ass'y

TAPE 2

FF/REW Belt (D2)x1

Tape Motor

Playback Head

TAPE 1 Main Belt (D1)x1 Main Belt (E1)x1 FF/REW Belt (E2)x1

Figure 4

1.6. How to remove the motor. (See Fig. 5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
(B1)x2 �2x9mm

Tape Motor

Figure 2

Clutch Ass'y

(F1)x2 �2.6x5mm

Figure 5

3�4