PIONEER CDJ-1000MK3/WAXJ5
Instrukcja Obsługi

P. 43). ¶ If a track�s low-frequency beat changes are too low in volume, the break points in the track may not be displayed properly. ¶ If a search or pause operation is performed during the time the waveform is being read, the waveform will not be displayed properly. ¶ Read-ahead of the WAVE pattern is not possible during MP3 playback.

1. Set the DJ Mixer�s CROSS FADER slider at its left side (CH1).
¶ Track A is heard from speakers.

2. Load a CD on player CD2. 3. Press the TRACK SEARCH buttons (4, ¢) on player CD2 to find and select track B. 4. Set the DJ Mixer�s MONITOR SELECTOR button CH2 to ON. 5. Rotate the DJ Mixer�s MONITOR LEVEL so that track B can be heard from the headphones. 6. Set cueing for track B on the headphones.
1 With player CD2 in the playback mode, press the PLAY/PAUSE button (6) to hear the point you wish to cue. ¶ When the jog mode is set to [CDJ], the unit will enter audible pause mode (sound can be heard); when set to [VINYL], the unit will enter inaudible pause mode (no sound can be heard). 3 When you have settled on the cue point, press the CUE button on player CD2. ¶ The player�s sound will be muted and cueing will be completed. 2 Rotate player CD2�s jog dial and search for the track�s cue point (first beat). ¶ Only track A is heard from the main speakers.

About TEXT display
When the TEXT MODE button is used to select TEXT display, the display shows CD-TEXT, including the names of tracks, albums, and artists. During MP3 playback, the display shows ID3 tag track name (if no ID3 tag is recorded, the display shows the file name) / ID3 tag album name / ID3 tag artist name. ¶ Each item can display up to 48 characters of text; text longer than 16 characters is scrolled. ¶ Text may include alphanumerics and some symbols. ¶ If no text is available, the [NO TEXT] message will be displayed. When a track name is selected in TEXT display, the [ ] icon will be displayed followed by the track name (with MP3, the ID3 tag�s title name or file name will be displayed). Also, during MP3 play, the bit rate will be displayed following the track name.

7. Simultaneously press player CD2�s PLAY/PAUSE button (6) when track A is heard from the speakers.
¶ Only track A will be heard from the main speakers. ¶ Track B will be heard from the headphones.

8. Move the tempo adjust slider to match the tempo (BPM=Beat Per Minutes) of tracks A and B.
Move the tempo adjust slider of player CD2 so that the BPM of track B matches those of track A. ¶ When the two BPM rates match, the BPM synchronization is complete. When an album name is selected in TEXT display, the [ ] icon will be displayed followed by the album name. Pioneer When an artist name is selected in TEXT display, the [ displayed followed by the artist�s name. Pioneer PRO DJ When folder search is performed with MP3, the folder name is displayed during the search. Pioneer DJ ] icon will be

9. Press the CUE button on player CD2.
¶ Player CD2 will enter pause mode at the cue point.

10.As soon as track A is heard from the speakers, press the PLAY/PAUSE button (6) on player CD2.
¶ Track B begins playing.

11.While checking the sound on the headphones, gradually move the DJ Mixer�s CROSS FADER slider from left to right side (CH2).
¶ The sound of track A from the speakers will steadily become mixed with the sound of track B. ¶ When the DJ Mixer�s CROSS FADER slider has moved all the way to the right side, the sound heard from the speaker will have changed from track A to track B, and the operation is complete.

7 Long mix play
If the BPM rates match, mixing of tracks A and B will sound good even if the CROSS FADER slider is in the middle position.

7 Fader start play
Using the cross fader start function of a Pioneer DJ mixer, step 10 above can be eliminated for even simpler mixing. In addition, when the CROSS FADER slider is returned to its original position, the status returns to that in step 9 (player CD2 at its cue point), so that you can repeat the same play as many times as you like.

39
<DRB1399> En

English