SONY D1025TM
Instrukcja Serwisowa

D1025TM

Customizing Your Monitor

Getting StartedYour Monitor Customizing

Adjusting the Picture Brightness and Contrast
1

Adjusting the Settings 1 Using the COLOR OSD

3 Using the SCREEN OSD
picture�s moire using the SCREEN OSD. Convergence is the alignment of the Red, Green and Blue You can adjust the convergence of the picture and cancel the

Press the ¨ (BRIGHTNESS) ./> or > (CONTRAST) ?// buttons. The BRIGHTNESS/CONTRAST OSD appears.

You can adjust the monitor�s color temperature using the COLOR OSD. For example, you can adjust the monitor to match the colors of a printed picture. You can adjust the color temperature from 9300K (blue-white) to 5000K (warm red). This setting is stored in memory for all input signals.
BRIGHTNESS/CONTRAST

electron beams on the screen. When convergence is not aligned, red or blue shadows may be noticeable (especially with text) which can affect the clarity or focus of the image. Moire is a wavy or elliptical pattern which may appear on the screen. The moire cancel adjustment is provided to eliminate moire. This setting is stored in memory for all input signals. 1 Press the MENU button to display the MENU OSD. 2 Highlight the SCREEN OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. 3 Press the ¨ (BRIGHTNESS) ./> buttons to select the desired adjustment item. 4 Press the > (CONTRAST) ?// buttons to adjust the item. 5 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

2

To adjust the brightness Press the ¨ (BRIGHTNESS) ./> buttons. To adjust the contrast Press the > (CONTRAST) ?// buttons.
Horizontal frequency

1 Press the MENU button to display the MENU OSD.
Vertical frequency

26

26

60.0kHz/ 85Hz

2 Highlight the COLOR OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. 3 Press the ¨ (BRIGHTNESS) ./> buttons to select either the 9300K, 5000K or variable option.

The OSD (On-screen Display) System
Introducing the OSD System
You can adjust most of the monitor�s settings using the OSDs (On-screen Display). All of the OSDs numbered in this illustration are described on the following pages in order. You can access any of these OSDs from the MENU OSD. To adjust monitor settings using the OSDs, follow the steps below:

� The 9300K and 5000K options display accurate preset color temperatures. � The variable option allows you to adjust the monitor using the full range of color temperatures. Adjust to the desired color temperature using the BRIGHTNESS and CONTRAST buttons. 4 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

EN F ES

� 6 �

COLOR
Basic controls: � Use the (MENU) button to display the MENU OSD and to select menu items. � Use the ¨ (BRIGHTNESS) ./> and > (CONTRAST) ?// buttons to highlight menu items and to adjust settings.
COLOR
9300K 5000K

CENTER
CENTER 73 26

SCREEN
SCREEN

Note If you are using one of the GEMs (Graphic Enhancement Mode), you can only adjust the color temperature from 11,000K to 9300K. For more information on GEMs refer to the �Graphic Enhancement Mode (GEM)� section on page 10.

Select

To
adjust the horizontal convergence

D J Cs

H CONVERGENCE

26 H CONVERGENCE

V CONVERGENCE

adjust the vertical convergence

Ct
eliminate elliptical or wavy lines on CANCEL MOIRE the screen adjust the degree of moire cancellation

PL

To adjust the monitor settings: 1 Press the MENU button to display the MENU OSD. 2 Highlight the desired OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again.

GEOMETRY
GEOMETRY

ZOOM
MENU
COLOR

2 Using the CENTER OSD
66 73

* MOIRE ADJUST

OK

MENU

ZOOM

CENTER SCREEN
H

You can adjust the picture centering using the CENTER OSD. This setting is stored in memory for the current input signal.
* CANCEL MOIRE must be �ON� for � appear on the screen. (MOIRE ADJUST)� to

26

GEOM LANG

EXIT SIZE

ZOOM OPTION

V

3 If necessary, use the BRIGHTNESS buttons to select a specific item. 4 Adjust the monitor setting using the BRIGHTNESS and CONTRAST buttons. � To reset the current item to its original setting, press the (RESET) button while the item�s adjustment OSD is displayed. 5 When you finish adjusting the setting, press the MENU button to return to the MENU OSD. Press the MENU button twice to return to normal viewing. � Resetting: If you press the RESET button while an OSD is displayed, only the current adjustment item is reset. For additional information on using the reset function, see the �Resetting the Adjustments� section on page 9. � The OSD automatically disappears after 30 seconds.

ROTATION

1 Press the MENU button to display the MENU OSD. 2 Highlight the CENTER OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again.

LANGUAGE
LANGUAGE
ENGLISH FRAN�AIS DEUTSCH ESPA�OL

SIZE
SIZE 73

OPTION
OPTION

ON 26 MANUAL DEGAUSS

3 To adjust vertical centering, press the ¨ (BRIGHTNESS) ./> buttons. 4 To adjust horizontal centering, press the > (CONTRAST) ?// buttons. 5 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

6

7