|
Kto jest w sklepie?
Sklep przegląda 5900 gości
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
QUICK SETUP GUIDE
Congratulations on your purchase of a FUNAI DVD/VCR. This Quick Setup Guide takes you through the first-time setup with simple instructions so you can enjoy exceptional audio and video quality as soon as possible. Please refer to the Owner's manual for detailed instructions. If you have read your instructions and still need assistance, call helpline at 0870-383-3010.
Clock Setting
Setting the Clock
This unit incorporates a 24-hour clock. The clock must be set for the Timer Recording function to operate correctly. 1) Press , then . 2) Press 3) Press or or to select �INITIAL�, then press to select �CLOCK�, then press . .
MENU TIMER SET UP INITIAL
STANDBY-ON SPEED/ SYSTEM
T-SET OPEN/CLOSE
1
2 5 8 0
3
CHANNEL
Unless stated, all procedures described use the remote control.
4) Use , or to select current year, month, date, hour and minutes. 5) Press to start the clock.
INITIAL CH TUNING CLOCK
4 7
CLEAR/ C.RESET
6 9 +10
DVD MODE
DISPLAY
VCR
Loading Batteries in the Remote Control
PLAY STOP
CLOCK YEAR MONTH DAY HOUR MINUTE
REC/OTR
SKIP SEARCH ENTER ZOOM
PAUSE AUDIO
2007 01 0 1 MO __ __
TOP MENU
MENU SETUP
RETURN
Note: � Press to go back to the item you want to correct during step 4). � Although seconds are not displayed, they begin counting from 00 when you exit by pressing . 1) Open the battery cover. 2) Insert two R6 (AA) batteries, with the (+) and (-) ends in the correct positions. 3) Close the cover. Use this feature to synchronize the clock with the correct time. � If the unit is unplugged or if there is a power failure for more than 30 seconds, you may have to reset the clock.
SUBTITLE
ANGLE
REPEAT
A-B
Connecting to a TV
VHF/UHF MIXER
Channel Presetting
WARNING!
Channel Presetting
Tuning of broadcast channels not already preset in the unit can be performed in two ways.
AERIAL
UHF
VHF
Never make or change connections with the power switched on. 1) Disconnect the antenna or cable from the
RF OUT
Automatic Channel Preset
MENU
STANDBY-ON SPEED/ SYSTEM
T-SET
OPEN/CLOSE
1) Turn on the TV and select the channel set as TV and connect it to the AERIAL jack of the
DVD
DIGITAL AUDIO OUT ANALOG AUDIO OUT S-VIDEO OUT
AERIAL
VHF/UHF MIXER
the video channel on the TV. unit. 2) Connect the RF OUT jack of the unit to the antenna in jack of the TV using the supplied RF cable. 3) Connect the AV1 (TV) scart jack of the unit to the scart input jack of the TV using a commercially available scart cable. 4) Plug in the TV and the unit. Note: � Playback picture from DVD and VCR cannot be delivered through the RF cable. The RF cable is only for sending the antenna signal to the TV. 2) Press 3) Press then press 4) Press or . . then press or 5) Press then press , then or . to select �CH TUNING� , to select �AUTO� , . to select �INITIAL� ,
TIMER SET UP INITIAL
1 4 7
CLEAR/ C.RESET
2 5 8 0
VCR
3 6 9 +10
DVD
CHANNEL
L
COAXIAL
VCR
DVD/VCR
AV2 (DECODER) AV1 (TV)
R
RF OUT
DISPLAY
MODE
INITIAL CH TUNING CLOCK
REC/OTR
TOP MENU
PLAY STOP
SKIP PAUSE
scart cable RF cable (not supplied) (supplied) to 21-pin scart jack
(TV)
SEARCH
AUDIO
MENU SETUP ZOOM
ENTER RETURN
CH TUNING AUTO MANUAL MOVE
SUBTITLE
ANGLE
REPEAT
A-B
to aerial jack
Scanning
PAL I_EN
1VMN23503 *****
|
|
|
> |
|