Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 67 (kliknij aby zobaczyć)
Recording video or TV programs
Using the A/V connecting cable
You can record a tape from another VCR or a TV program from a TV that has video/ audio outputs. Use your camcorder as a recorder.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If you are recording a tape from the VCR, insert a recorded tape into the VCR. (2) Set the POWER switch to VCR on your camcorder. (3) Set DISPLAY in to LCD in the menu settings (p. 85). (4) Press z REC and the button on its right simultaneously on your camcorder, then immediately press X on your camcorder. (5) Press N on the VCR to start playback if you record a tape from a VCR. Select a TV program if you record from a TV. The picture from a TV or VCR appears on the LCD screen or in the viewfinder. (6) Press X on your camcorder at the scene where you want to start recording from.
Editing
4
REC
PAUSE
S VIDEO OUT TV S VIDEO VIDEO AUDIO AUDIO/VIDEO
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander (DCR-TRV11/TRV20 only)
In step 4, press z REC and MARK simultaneously, then immediately press X. And in step 6, press X at the scene where you want to start recording from.
