Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 40 (kliknij aby zobaczyć)
Basic Setup�Continued
Speaker Settings
Speaker Impedance
This section explains how to specify the impedance of your speakers. Check the backs of your speakers or their manuals to determine their impedance. Note: Before you change this setting, turn down the volume.
2
Use the Up/Down [ ]/[ ] buttons to select �0. Hardware Setup,� and then press the [Enter] button. The Hardware Setup menu appears.
3
Use the Up/Down [ ]/[ ] buttons to select �1. Speaker Impedance,� and then press the [Enter] button. The Speaker Impedance menu appears.
Advanced Menu 0.Hardware Setup 0-1.Speaker Impedance
1 2, 3 2�4 1, 5
a.Minimum
:6 ohms
4
Use the Left/Right [
]/[
] but-
tons to select: 4 ohms: Select if the impedance of any one speaker is between 4 and 6 ohms. 6 ohms: Select if the impedances of all speakers are between 6 and 16 ohms.
5
Press the [Setup] button. The setup menu closes.
Notes: � This procedure can also be performed by using the DTR-8.4�s [Setup] button, [ ]/[ ]/[ ]/[ ] buttons, and [Enter] button.
1
Press the scroll wheel, and then press the [Setup] button. The main menu appears onscreen.
