INTEGRA DTR8.4
Instrukcja Serwisowa

DTR-8.4 PANEL VIEWS
REMOTE CONTROLLER
Tape Mode
Tape mode is used to control an Integra/Onkyo cassette recorder connected to the DTR-8.4 via . To select Tape mode, press the scroll wheel. "AMP" appears on the display. Note: While neither the [Input] button nor [Mode] button is illuminated, the scroll wheel changes the input source and remote controller mode simultaneously (e.g., set the input source and mode to "TAPE.")
Scroll wheel

1 Mode button

5

This button is used with the scroll wheel to select the remote controller modes. Press the scroll wheel until "AMP" appears on the display. 2 Previous/Next [ ]/[ ] buttons The Previous [ ] button is used to select the previous track. During playback it selects the beginning of the current track. The Next [ ] button is used to select the next track. The Previous/Next [ ]/[ ] buttons make not work properly with some cassette tapes depending on how they were recorded.
3 Rewind/FF [

]/[ ] buttons The Rewind [ ] button is used to start rewind. The FF [ ] button is used to start fast forward.

4 Rec [

1

6

7

] button This button is used to start tape recording. 5 Light button This button is used to turn on or off the remote controller's illuminated buttons. 6 Input button This button is used to select the input source. Press this button first, and then roll the scroll wheel until "TAPE" appears on the display.
7 VOL button

8 2 3
10

This button is used to set the volume of the DTR-8.4.
8 Muting button

9

4
11

This button is used to mute the DTR-8.4. This function can be set only with the remote controller. 9 Play [ ] button This button is used to start tape playback.
10 11

Stop [ ] button This button is used to stop tape playback. Reverse Play [ ] button This button is used to start reverse playback.

15