MSET Menu Menus
AE (Manual Exposure) Adjusts the brightness. Settings ([ ] = Factory-preset) For video recording [AUTO]: The brightness is adjusted automatically. �6 to +6: Corrects the brightness within this range in increments of 1. Use / to set the value.
To lock the exposure When the menu disappears after you finish configuring the setting, press and hold 49 for more than 2 seconds. The indicator appears. AF (Manual Focus) Adjusts the focus. [AUTO]: The focus is adjusted automatically. : Adjusts the focus manually. Use / to set the focus. (When zooming, the subject will not go out of focus if you adjust the focus at the telephoto (T) side before zooming to the wide-angle (W) side.) [AUTO]: White balance is adjusted automatically. MWB: Adjusts the white balance manually depending on the light source. 1) Hold a sheet of plain white paper White paper in front of the subject. Adjust the zoom, or position yourself so that the white paper fills the screen. 2) Press and hold 49 until the indicator starts blinking then stops blinking. FINE: When shooting outdoors on a sunny day. CLOUD: When shooting outdoors on a cloudy day. HALOGEN: When a video light or similar type of lighting is used.
WB (White Balance) Adjusts the white balance to achieve the optimum colors for the amount of light in your surroundings during recording.
CONTINUED ON NEXT PAGE
RECORDING
For still image recording [±0]: The brightness is not adjusted. �2.0 to +2.0 (EV): Corrects the brightness within this range in increments of 1/3EV. Use / to set the value.
