The mode and page that will be selected when the power is turned on
The state of this instrument when the power is turned on will depend on the setting of �Power On Mode� (GLOBAL 1.1: System, Preference page). If �Power On Mode� is Reset (factory setting), this instrument will automatically selects the Combination mode 1.1: Play. If �Power On Mode� is Memorize, this instrument will be in the mode and page that were last selected when the power was turned off. The Memorize setting will remember the mode and page that were last selected, the combination number that was last selected in Combination mode, and the program number that was last selected in Program mode. If another mode is selected when the power is turned on, you can press the [COMBI] key or [PROG] key to select the 1.1: Play page with the last-selected combination number or program number.
1. Turning the power on
1 Press KARMA Music Workstation�S [POWER] switch to turn on the power. The LCD screen will display the name of your model, and the software version. (The following graphic shows the factory-set LCD screen . The version number is subject to change without notice.)
2 Turn on your powered monitors or stereo amp. 3 Raise this instrument�s [VOLUME] slider to an appropriate level, and adjust the volume of your powered monitors or stereo amp.
The LCD screen when separately sold options are installed (When the power on)
This instrument allows you to install separately sold options. When the power is turned on, the type of installed options will be displayed. After installing an option, be sure to check this display to verify that the option was installed correctly. If the option is not displayed here even though it was installed, it was not installed correctly. Turn off the power and re-install the option. (
