and Cleaning ..............................................
Interior - hard water deposits may be removed, i needed, using a recommended cleaner labeled wash er safe. Lint Filter - it is self-cleaning and requires no mainte nance. The filter is located under the agitator on th_ bottom of the washtub. During the wash and rins_ portion of the cycle, lint is collected on the illter. Then during the spin and drain the filter is cleaned automatically.
Turn off the water faucets after finishing the day's washing. This will shut off the water supply to the washer and prevent the unlikely possibility of damage from escaping water. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur, Clean the following as recommended: Control Panel - clean with a soft, damp cloth and glass cleaner. Do not use abrasive powders or cleaning pads. Cabinet - clean with soap and water followed with an appliance wax, if desired,
Storing
the Washer ............................................
� Advance the cycle control knob to Spin and lower th_ drain hose to eliminate any water that may be in the drain hose. � Disconnect the washer from the electrical supply ant leave the washer lid open to let air circulate inside the tub.
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare the washer for storage as follows: � Select the NORMAL cycle for regular fabrics and add one cup of chlorine bleach or white vinegar to a full load of water without clothes. Run the washer through a complete cycle. � Turn the water faucets off and disconnect the inlet hoses.
Water Use .............................................................
REGULAR CYCLE PERMANENT PRESS CY_ :LE
