SHARP PGM15X
Instrukcja Serwisowa

PG-M15X PG-M15S
AN-M15T

3. DMD Type Setting Sop
1. Record type of DMD chip (An English letter in capital) before assembly. 3. Choose "DMD Bin" to do setting.

2. Select �DMD� on the process mode screen. 2-1. Turn on the power. Press the ON/OFF button on the projector or the POWER button on the remote controller. 2-2. Make sure the message �Turn Power OFF?� on the screen. With this message still onscreen, press the buttons in this order: �'�, �'�, �"� and �"� on the remote controller, or �+�, �+�, �-� and �-� on the projector. 2-3. Be sure the process adjustment menu appears on the screen, and select DMD.

4. Use "+" and "-" keys on Keypad to choose DMD type same as the type of new one

2-1

2-2

2-2

Projector
2-1

RemoteController

5. Press "Enter" key and then Press "MENU" key to go back to the original image. Note: Be sure to make this DMD Type Setting to keep up the DMD chip reliability.

27