SHARP R757M
Instrukcja Obsługi

R-757M Modular Manual

03/04/2003

08:54

Page 8

SETTING THE CLOCK
Your oven has a 12 hour and a 24 hour clock. � To select the 12 hour clock, press the DELAY START/CLOCK SET key once. �12H� will appear on the display. x1 � To select the 24 hour clock, press the DELAY START/CLOCK SET key twice. �24H� will appear on the display. x2 To set the time of day follow the instructions opposite. NOTES: � Press the STOP/CLEAR key if you make a mistake during programming. � If you press any of the TIME keys too many times, continue to press the key until the desired time re-appears. � To check the time of day during a cooking process, press the DELAY START/CLOCK SET key and the time of day will remain on the display as long as you keep your finger on the key. This does not affect the cooking process. � If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will only show � : � when cooking is complete. � If the electrical power supply to your microwave oven is interrupted, the display will intermittently show �88:88� after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased. � When you want to reset the time of day, follow the opposite example again. 2. Enter the hours by pressing the TIME keys. 1. Select the clock type required.

3. Press the DELAY START/CLOCK SET key once. x1

4. Enter the minutes by pressing the TIME keys.

5. To start the clock, press the DELAY START/CLOCK SET key once. x1

8