Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
SA-PTX7P
� Type B transmitter uses two ADC (Analog to Digital Converter) to send audio streams from Channel 1 and Channel 2 for the FX65/FX66 surround sound and FX85 second room audio, respectively. Type 2 receiver outputs audio through Channel 2. The software multiplexes which channel to listen to by setting the baseband accordingly. For example, if the receiver is configured as an FX85 receiver (Type 2), the baseband is configured to accept Channel 1 audio transmission and redirect it to Channel 2 Out. If the receiver is set as an FX65/FX66 or wireless subwoofer, the baseband is configured to accept channel 2 audio transmission and redirect it to the same Channel 2 Out.
8.7.6.
Activation
� FX65/FX66 can be activated in the main unit by using either transmitter Type A or Type B and enabling surround sound by selecting Surround Music, DPL or Super Surround (Music/Movie). � FX85 Wireless feature is enabled by default when the user uses transmitter type B.
8.7.7.
LED Indication
� For FX65/FX66, there will be two-color LED that will be used to indicate Power On and Link. If link, the two-color LED will be green, else, it will be red. For FX85, the front panel will have LED indicators for Standby,, Wireless Link, Charge, Option and Music Port. During Power On, Standby LED will be OFF. Only during power OFF will this LED be ON (Red). Wireless Link indicator will be ON (Green) when link is established between TX and RX and OFF when link is lost. Pressing the selector button will toggle from any of the selector modes Wireless, Option and Music port. Only the currently selected mode will be ON (Green), the other two will be OFF. Charge LED will be ON (Red) once iPod charging is initiated.
8.7.8.
Key Operation (FX85)
� Selector Button This button will be used to select Wireless, Option or M.Port and enabling the corresponding LED indicators for each mode. During Power On, by default, selector mode is set to Wireless when power is initially supplied to the system. But during Power On/OFF button, it will remember the last selector mode setting. � Play Button This button will send command to the main unit to play CD/DVD as well as the iPod. This function is therefore meaningful only if the second room selector is in Main Source (with the first room user in CD/DVD or iPod) and iPod. � Stop Button This button will send command to the main unit to stop CD/DVD as well as the iPod. This function is therefore meaningful only if the second room selector is in Main Source (if the first room user is in CD/DVD mode or iPod) and iPod. � Forward Skip/Channel Up This button depends on the second room source currently selected. It will be interpreted as a Forward Skip by the main unit if the second room source is in Main Source (with the first room user is in CD/DVD or iPod mode) and iPod. It will be interpreted as a Channel Up (preset channels only) if the second room source is in FM, AM, or XM. � Reverse Skip/Channel Down This button depends on the second room source currently selected. It will be interpreted as a Reverse Skip by the main unit if the second room source is in Main Source (if the first room user is in CD/DVD or mode) and iPod. It will be interpreted as a Channel Down (preset channels only) if the second room source is in FM, AM, or XM. � Volume Control Volume control will be local to the FX85 module only. Default volume (TBD) will be set every time power is first supplied to the system or during exit from stand by mode. � ID-setting Operation ID setting operation can be invoked by pressing fast-forward key in the main unit and three [3] key in the remocon. Once IDsetting is triggered, the receiver must press its ID-setting button within 60 seconds. During this period, the transmitter will be in open connect mechanism whereby any receiver can pair with the transmitter. After this period elapsed, the transmitter will revert back to using close connect code whereby only those receivers which have the same ID as the transmitter will be able to link. The user also has the option to exit the ID setting operation by pressing the same keys.
