The appliance is touching the Move the appliance slightly. wall or other objects. Unusual noises. A component, e.g. a pipe, on If necessary, carefully bend the rear of the appliance is the component out of the touching another part of the way. appliance or the wall. The compressor does not start This is normal, no error has immediately after changing occurred. the temperature setting. Water on the floor or on stoWater drain hole is blocked. rage shelves. The compressor starts after a period of time. See the "Cleaning and Care" section.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker. Light bulb data: 220-240 V, max. 15 W To switch off the appliance, turn the temperature regulator to position "0". Unplug the mains plug. To change the light bulb, undo the screw. Press the light bulb cover as shown and slide it backwards. Change the defective light bulb. Refit the light bulb cover and the screw. Put the refrigerator back into operation.