SONY SMS-2P
Instrukcja Serwisowa

CH 1 INPUT

1

2

3

4

5

1 INPUT VOL. (channel 1 input level) control Turning to the right increases the level of the sound output from the channel 1. 2 Pin plug input terminal Phono plug input terminal for channel 1. Connect to the output on a piece of audio equipment (etc.). 3 Standard plug input terminal Phone plug input terminal for channel 1. Connect to the output on a musical instrument (etc.). 4 Balanced input terminal Balanced input terminal for channel 1. Connect to the output terminal of a professional mixing console (etc.). 5 Balanced input terminal polarity switch Use to switch the polarity of the channel 1 balanced input terminal.

CH 2 INPUT

1

2

3

4

5

6

1 INPUT VOLUME. (channel 2 input level) control 2 Pin plug input terminal 3 Standard plug input terminal 4 DIRECT switch. (Only for Balanced input terminal) Setting this switch to DIRECT allows you to bypass the tone controls and send the sound from a mixer (etc.) directly to the speaker�s power amplifier. In this case, BASS and TREBLE adjustments are not possible. Only the MASTER VOL. and TW LEVEL can be adjusted. Note When the DIRECT switch is set to DIRECT, no sound will be output to the other speakers (if other speakers are connected). 5 Balanced input terminal 6 Balanced input terminal polarity switch

Speaker Connections and Placement
Placement
The speaker can be placed vertically or horizontally.

Connections
Be sure to set the POWER switch on the back panel to OFF before making any connections.

Balanced terminal polarity When the balanced input terminal polarity switch is set to 2HOT.
1:GND 2:HOT 3:COLD 2 3 1 2 3 1

When the balanced input terminal polarity switch is set to 3HOT.
1:GND 2:COLD 3:HOT

Balanced (XLR) cord phone plug cord Audio phono cord Connect only one.

To the output terminals of an electronic instrument, mixing console, computer, or audio device (etc.).

To a wall outlet

�4�