JVC TH-M65AS
Instrukcja Obsługi

Getting started

Connecting the powered subwoofer
Connect the supplied powered subwoofer (SP-PWM65) using the system cord (supplied). � Connect the system cord by matching the 5 marks on the plugs to the ones on the center unit and powered subwoofer.

System cord (supplied) Ensure that the 5 mark on the plug faces down. Center unit

Powered subwoofer

Connecting the satellite speakers
7 Speaker layout
When positioning the speakers, to obtain the best possible sound from this system you need to place all satellite speakers at the same distance from the listening position with the front of each speaker facing toward the listener.
When you cannot place them at the same distance from the listening position, you can make adjustment so that speakers operate as if they are placed at the best position. (A pg. 49) A Center speaker Powered subwoofer

� Normally place the powered subwoofer in front of you. (Since bass sound is non-directional, you do not need to place it at the same distance as the other speakers.) NOTE
� Although the satellite speakers and the powered subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep the distance between them to the TV to over 10 cm. � For safety reasons, always ensure that there is sufficient space behind the powered subwoofer. � When you position the satellite speakers in a relatively high place, such as the top of your bookshelf, place them on a flat and level surface. � Speaker grilles are not removable. Trying to remove them by force may damage them. � Be sure to place the powered subwoofer to the TV�s right. If you place the powered subwoofer to the TV�s left, keep sufficient distance between them to prevent the TV screen from appearing mottled. � Do not lean against the satellite speakers, as the speakers could fall down or break, possibly causing injury. Especially be careful not to let children lean against them. Front left Front right

Surround left

Surround right

10