Changing the Layout of the Split Screens
1. Press the [MENU] button. � Open the menus in accordance with the instructions provided in MENU Screen Operations (page 17) in the sequence of [MENU] � [LIVE PICTURE]. � The layout pattern name that is set is displayed at the center of the screen. � First of all, the �QUAD-A� screen will be displayed. * The layout cannot be changed when in the playback mode. � Press the [0] button to select the black screen. � Press the [SEQUENCE] button for at least one second to return the blue border to the previous sub-screen and display the screen as it was prior to amendment. 5. Press the [SPLIT] button. � The split-screen selection screen will be displayed. Repeat procedures 2 to 5 to change the �6 WAY�, �9 WAY� or any other split-screen display layouts. 6. Press the [RETURN] button. � A confirmation screen will be displayed.
QUAD-A
A SET CONTENT WAS CHANGED. DO YOU UPDATE THIS CONTENT?
2. Press [ / ] to select the split layout required. � Changes sequentially in the order of �QUAD-A� � �QUAD-B� � �QUAD-C� � �6 WAY� � �9 WAY� � �QUAD-A� when [ ] is pressed.
SAVE
CANCEL
* The above is an example of �QUAD� screen. 7. Select �SAVE� with [ / ], and then press the [SET]
3. Press the [SET] button. � The sub-screen will be displayed within the blue border at the top left-hand side of the screen.
button. � Changes the layout of the split screen. * Press [CANCEL] to return to the top menu screen. CAUTION It is not possible to set �QUAD-A�, �QUAD-B� and �QUAD-C� at the same location when setting up the layout for �QUAD� screens.
* The above is an example of �QUAD� screen. 4. Press any of the [1] to [9] buttons. � The camera input that corresponds to the number pressed will be displayed as a sub-screen inside the blue border. � The blue border moves to the next sub-screen.
