Getting Started
Resetting the unit
Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ball-point pen.
Reset button
Setting the clock
The clock uses a 12-hour digital indication. Example: Set the clock to 10:08
1
Press (SHIFT), then press (8) (SET UP).
Clock Set
1 Press (10) (n).
Clock
The hour digit flashes.
1:��
2 Set the hour.
to go backward to go forward
EN
Notes � Pressing the reset button will erase the clock and some memorized functions. � When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. If you insert a disc within these 10 seconds, the unit will not be reset, and you will have to press the reset button again.
Clock 1�:��
3 Press (10) (n).
Clock 1�:��
The minute digits flash.
4 Set the minute.
to go backward
Using the decoy cover
To deter theft of this unit, use the decoy black ashtray cover when not using your car.
to go forward
Clock 1�:�8
2
Press (SHIFT).
1�:�8
The clock starts.
3
Note If the unit does not extend 6 mm from the dash panel, you may not be able to use the decoy cover.
Press (SHIFT). After the mode setting is complete, the display goes back to normal playback mode.
Note If the POWER SELECT switch on the bottom of the unit is set to the B position, turn the power on first, then set the clock.
