|
|
|
Kto jest w sklepie?
Sklep przegląda 6043 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Getting started
To connect to an audio amplifier or receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
The unit
DIGITAL OUT
PCM / STREAM COAXIAL
VIDEO OUT
COMPONENT Y PB PR
VIDEO OUT SELECT
AV COMPU LINK
OPTICAL
S-VIDEO AND VIDEO
COMPONENT AND VIDEO NTSC PAL
S-VIDEO
VIDEO
RIGHT
LEFT
AUDIO OUT
Red
White
: For XV-S402SL
Amplifier or receiver White
IN
LEFT
AUDIO
RIGHT
Red Audio cable (not supplied)
� Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver. Getting started
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL* or COAXIAL) to the digital input of a receiver, MD, etc. by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound. When you make the digital connection, we also recommend to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.
* : The OPTICAL jack is equipped for XV-S402SL only.
The unit
DIGITAL OUT
PCM / STREAM COAXIAL
OPTICAL
VIDEO OUT
COMPONENT Y PB PR
VIDEO OUT SELECT
AV COMPU LINK
S-VIDEO AND VIDEO
COMPONENT AND VIDEO NTSC PAL
S-VIDEO
VIDEO
RIGHT LEFT
AUDIO OUT
Red
White
: For XV-S402SL
Optical digital cable (not supplied) Coaxial digital cable (not supplied)
Digital equipment White
IN
LEFT
IN
OPTICAL
AUDIO
RIGHT
DIGITAL
COAXIAL
Audio cable (not supplied)
The OPTICAL jack is protected by the cover. To connect the optical cable to the jack, pull out the cover and then connect the plug to the jack inside in the correct direction (For XV-S402SL only).
Red
NOTES
� When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the �DIGITAL AUDIO OUTPUT� setting in the �AUDIO� page of the preference display correctly according to the connected audio equipment. If the �DIGITAL AUDIO OUTPUT� is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See �DIGITAL AUDIO OUTPUT� on page 46. � With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for these items must be made from the decoder.
18
|
|
|
> |
|
