jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 23 (kliknij aby zobaczyć)
DVP-NS9100ES
6. Key Check After the SIRCS reception check finished, the Key check is executed. Upon start of the Key check, �KEY CHECK� is displayed on the FL tube. 11 keys are checked as described below. Each time a key is pressed, the specified segment lights up, and at one second after all keys were pressed, all of FL tube go off and the Key check finishes.
Key check
8. Display Test Mode Result Indication After the Jog and LED check finished, it displays result of Display Test mode. At this time, even if a signal from a key on the set or remote commander is received, nothing changes.
Self check mode finish
Using the grid 1 to grid 12, the following characters are displayed. �TEST OK�
<KEY>
I/1 SA-CD/CD MULTI/2CH DIMMER VIDEO OFF i.LINK A N X x PUSH ENTER
<SEGMENT>
H SA-CD CD VCD DVD X MULTI HYBRID AUDIO VIDEO PROGRESSIVE
At the SIRCS reception check, Key check, Jog and LED check, if you proceed to the next check without completing current check, the check name that has not completed yet is displayed instead of �TEST OK�, as follows.
If SIRCS reception check has not completed (If JOG dial is pressed during SIRCS reception check) If KEY check has not completed (If SIRCS key code is received during KEY check) If JOG and LED check has not completed (If JOG dial is pressed without rotating JOG dial even once during JOG and LED check) �KEY NG� �SIRCS NG�
�JOG LED NG�
Cancel processing (SIRCS key code receiving)
Also, if two or more checks have not completed yet
All three checks are erroneous Two checks are erroneous �SI KY JO NG� �SI JO NG� �SI KY NG� � KY JO NG�
Key check finish
If the SIRCS key code is received as a cancel processing of the Key check, the test proceeds to the following Jog and LED check. 7. Jog and LED Check After the Key check finished, the Jog and LED check is executed as follows. Upon start of the Jog and LED check, �JOG AND LED� is displayed on the FL tube. There are six LEDs. The order in which the LEDs light up when the . > knob is turned as described below.
clockwise counterclockwise
Each error is displayed at the fixed position of the FL tube (not left aligned), and the items that have completed are blank.
Note: The alphabets mentioned above denote the following checks. SI : SIRCS reception check KY : Key check JO : Jog and LED check NG : There are error items.
DIMMER (Amber) VIDEO OFF (Amber) i.LINK (Blue)
N (Green) X (Amber)
If the x button is pressed during the Jog and LED check, the Jog and LED check finishes and it displays result of the Display Test mode. (See next item)
