Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
new_12108_14108.qxp
12/13/2005
10:52 AM
Page 10
Operating sequence
Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer. Then run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4.Switch the machine ON and OFF
Turn the selector dial to the desired programme to the switch appliance on.To switch the appliance off turn it to �Off�.
1. Place the laundry in the drum
Open the door.Place the laundry in the drum, one item at a time, shaking them out as much as possible.Close the door.
5.Select the desired programme
Turn the selector dial to the desired position: the LED corresponding to the different phases making up the selected programme illuminate.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash or soak phase, pour detergent into the appropriate compartment marked .
The duration of the programme appears in the display.
6.Select the temperature
Press the �Temp.� button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant LED will light up.
3. Measure out the additive
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.
