WHIRLPOOL ST14CKXHW00
Instrukcja Obsługi

s

Is an ice cube jammed in the ejector arm? Remove the ice from the ejector arm with a plastic utensil. Refer to the �Ice Maker Operation� section. Does the ice maker mold have water in it or has no ice been produced? Check to see if your refrigerator has been connected to your home water supply and the supply shut-off valve is turned on. Refer to the �Connecting the Refrigerator to a Water Source� section.
s

Temperature is too warm
Are the air vents blocked in either compartment? This prevents the movement of cold air from the freezer to the refrigerator. Remove any objects from in front of the air vents. Refer to �Ensuring Proper Air Circulation� for the location of air vents. Are the door(s) opened often? Be aware that the refrigerator will warm when this occurs. In order to keep the refrigerator cool, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. Has a large amount of food just been added to the refrigerator or freezer? Adding a large amount of food warms the refrigerator. It can take several hours for the refrigerator to return to the normal temperature. Is the control set correctly for the surrounding conditions? Refer to the �Setting the Control(s)� section.

s

s

NOTE: If not due to any of the above, there may be a problem with the water line. Call for service.

The ice maker is producing too little ice
s

Has the ice maker just been installed? Wait 72 hours for full ice production to begin. Once your refrigerator is cooled down, the ice maker should begin producing 70-120 cubes every 24 hours. Has a large amount of ice just been removed? Allow 24 hours for ice maker to produce more ice. Is the control set correctly? Refer to the �Setting the Control(s)� section. Is the water shut-off valve turned completely on? Turn valve on fully. Refer to the �Connecting the Refrigerator to a Water Source� section. Is there a water filter installed on the refrigerator? This filter may be clogged or installed incorrectly. First, check the filter installation instructions to ensure that the filter was installed correctly and is not clogged. If installation or clogging is not a problem, call a qualified person or a technician.

s

s

s

s

s

There is interior moisture build-up
s

s

s

Off-taste or odor in the ice
s

Are the plumbing connections new, causing discolored or off-flavored ice? Discard the first few batches of ice. Have the ice cubes been stored for too long? Throw old ice away and make a new supply. Has food in the refrigerator been wrapped properly? Refer to the �Refrigerator Features� section. Do the freezer and ice bin need to be cleaned? See the �Cleaning Your Refrigerator� section. Does the water contain minerals (such as sulfur)? A filter may need to be installed to remove the minerals.

Are the air vents blocked in the refrigerator? Remove any objects from in front of the air vents. Refer to �Ensuring Proper Air Circulation� for the location of air vents. Is the door opened often? To avoid humidity build-up, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. (When the door is opened, humidity from the room air enters the refrigerator. The more often the door is opened, the faster humidity builds up, especially when the room itself is very humid.) Is the room humid? It is normal for moisture to build up inside the refrigerator when the room air is humid. Is the food packaged correctly? Check that all food is securely wrapped. If necessary, repackage food according to the guidelines in the �Refrigerator Features� section. Wipe off damp food containers before placing in the refrigerator. Is the control set correctly for the surrounding conditions? Refer to the �Setting the Control(s)� section. Was a self-defrost cycle completed? It is normal for droplets to form on the back wall after the refrigerator self-defrosts.

s

s s

s

s

s

s

The divider between the two compartments is warm
The warmth is probably due to normal operation of the automatic exterior moisture control.

s

The doors are difficult to open
s

Are the gaskets dirty or sticky? Clean gaskets and the surface that they touch. Rub a thin coat of paraffin wax on the gaskets following cleaning.

16