CASIO G056B-4V
Instrukcja Obsługi

MA0512-EA

Operation Guide 3028
About This Manual
� Depending on the model of your watch, display text appears either as dark figures on a light background or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background. � Button operations are indicated using the letters shown in the illustration. � Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the �Reference� section.

General Guide
� Press C to change from mode to mode. � In any mode (except when a setting screen is on the display), press B to illuminate the display. Timekeeping Mode Press . Stopwatch Mode Preset Timer Mode Interval Timer Mode World Time Mode Alarm Mode

Timekeeping
Hour : Minutes Month � Day Day of week

Use the Timekeeping Mode to set and view the current time and date.

Read This Before You Set the Time and Date !

The times displayed in the Timekeeping Mode and World Time Mode are linked. Because of this, make sure you select a city code for your Home City (the city where you normally use the watch) before you set the time and date. � For full information on city codes, see the �City Code Table�.

To toggle between 12-hour and 24-hour timekeeping In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-hour timekeeping. � With the 12-hour format, the P (PM) indicator appears for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m. � With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. � The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. � The P indicator is not displayed with the Timekeeping Mode time on the Preset Timer Mode, Interval Timer Mode, World Time Mode, and Alarm Mode screens.

Seconds PM indicator

Stopwatch
1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C to move the flashing in the sequence shown below to select other settings.
Initial Stopwatch Mode Screen

To set the time and date

Seconds Day

DST Month

City Code Year

Hour Minutes

Timekeeping Mode time

The stopwatch lets you measure elapsed time. The upper display and lower display can be used for official timing of an event or game. � The measurement range of the upper display is 59 minutes 59 seconds. � The measurement range of the lower display is 99 minutes 59 seconds. � The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. � The stopwatch measurement operation continues even if you exit the Stopwatch Mode. � All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C.
Elapsed Time Screen

3. When the setting you want to change is flashing, use D and B to change it as described below.
Screen To do this: Reset the seconds to Toggle between Daylight Saving Time ( and Standard Time ( ) Change the city code Change the hour or minutes Change the year Change the month or day ) Use D (east) and B (west). Use D (+) and B (�). Do this: Press D. Minutes Seconds � Press D to pause and restart elapsed time measurement.

Minutes Seconds � This time measurement cannot be paused. It shows the total elapsed time since the timing operation started.

� This time measurement (1/100 second) cannot be paused.

To measure times with the stopwatch
Elapsed Time Start Stop*1 Re-start Stop*1 Hold down Clear

� See �Daylight Saving Time (DST)� for details about the DST setting. 4. Press A to exit the setting screen.

Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.

*1 Elapsed time measurement in the lower display continues.

Using the Watch for Official Timing of a Sport Event
After you set a game or event time, the watch will sound an alarm when the time in the lower display reaches that time. If the event is interrupted for some reason, you can press D to pause and restart timing in the upper display. The lower display shows the total elapsed time since the start of the timing operation. You can calculate the total amount of time that play was interrupted (lost time or injury time) by subtracting the upper display time from the lower display time.

To toggle the Timekeeping Mode time between DST and Standard Time 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C to display the DST setting screen. 3. Press D to toggle between Daylight Saving Time ( displayed) and Standard Time ( displayed). 4. Press A to exit the setting screen. � The DST indicator is on the display while Daylight DST indicator Saving Time is turned on.

1