Tekstowy podgląd strony 108 (kliknij aby zobaczyć)
Option
Description
z If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off.
4:3 Default Wide Zoom Select the default Screen Mode to use for 4:3 sources Normal Full Zoom
Select to enlarge the 4:3 size picture, while the upper and lower parts of the picture are condensed to fit the wide screen. Select to return the 4:3 picture to normal mode. Select to enlarge the 4:3 picture horizontally only, to fill the wide screen. Select to enlarge the 4:3 picture horizontally and vertically to an equal aspect ratio that fills the wide screen. Select to continue using the current Wide Mode setting when the channel or input is changed.
Menus
Off Vertical Center
Allows you to move the position of the picture up and down in the window. Available only in Wide Zoom and Zoom modes. Press V or v and press to choose a correction between +25 and �25 (Zoom mode), and +5 and �5 (Wide Zoom mode). Allows you to adjust the vertical size of the picture. Available only in Wide Zoom and Zoom modes. Press V or v and press to choose a correction between +7 and �7. Orbit Moves the picture position to reduce image retention. This does not prevent image retention completely if the same picture is displayed for an extended period of time. Displays a white screen to reduce image retention.
